The LTE communicator module is designed to be used with the JA-102K, JA-103K and JA-107K control panel units of JABLOTRON alarm systems.A control panel fitted with the JA-194Y-LITE module can communicate with an ARC via GSM networks. It also enables remote configuration of the control panel using the F-Link software.
| Module power supply | 8–15 V DC (from the control panel) |
| Average current consumption | approx 9 mA (depends on the GSM signal strength) |
| Peak current consumption | 720 mA |
| GSM communication band | 2G (GSM, EDGE) 900/1800 MHz 3G 900/2100 MHz (B8, B1) 4G (LTE) 800/900/1800/2100/2600 MHz (B20, B8, B3, B1, B7) |
| IHAS classification | Security grade 2/Environmental class II (according to EN 50131-1) (Note: this applies only in combination with a Security-grade-2-certified control panel. For more info about ARC settings, see the Control panel installation manual) |
| Dimensions | 70 x 37 x 25 mm |
| Weight | 23 g |
| Operational environment | indoor general |
| Operational temperature | -10 °C to 40 °C |
| Average operational humidity | 75% RH, non-condensing |
| Compatible with RCT (ARC receiver) | according to communication protocols |
| SPT communicator type | SPT type Z (control panel expansion module) |
| AS/SPT interface | Pass-through |
| Supported ATS class/communication protocol: | ATS class |
| SP3–SP5 | |
| DP4 | |
| ATS interface | |
| GSM-GPRS (IP) | |
| LAN (IP) GSM-GPRS (IP) | |
| Transmission protocol | |
| JABLO IP ANSI SIA DC-09 | |
| JABLO IP ANSI SIA DC-09 | |
| Certification body | Trezor Test s.r.o. (No. 3025) |
| In compliance with | EN 62368-1, ETSI EN 301 511, EN 50130-4, ETSI EN 301 489-1, ETSI EN 301 489-52, ETSI EN 301 489-17, ETSI EN 301 908-1, ETSI EN 301 908-13, EN 300 328, EN 55032, EN 50665, EN IEC 63000, EN 50131-1, EN 50131-10, EN 50136-1, EN 50136-2, ANSI SIA DC-09 |
| Can be operated according to | (CEPT/ECC/DEC/(04)06, ERC/DEC/(97)02, ECC/DEC/(06)01) |
