Used for motion detection inside buildings, including visual alarm confirmation. Taking a photo is activated by motion, so the cause of the alarm is always indicated in the image. Guaranteed detection coverage 90°/12 m.
| Power | from the control panel BUS +12 V (+9 ... +15 V) |
| Current consumption | |
| - nominal for the backup supply calculation | 5 mA |
| - maximum for cable choice | 250 mA (with high flash intensity) |
| Recommended installation height | 2.5 m above the floor |
| PIR detection angle/detection coverage | 90°/12 m |
| Horizontal camera capture angle | 90° |
| Range of the flash | max. 3 meters |
| Camera resolution | LQ 320x240; HQ 640x480 pixels |
| Photo size LQ/HQ (typically) | 2-20 kB/2-64 kB (6 kB/35 kB) |
| Typical (LQ) photo transmission time to the control panel | up to 20 s. (10 s) |
| Ideal (HQ) photo transmission time to the control panel | up to 130 s (60 s) |
| Typical photo transfer time to the server | 15 s/GPRS; 2 s/LAN |
| Dimensions, weight | 110 x 60 x 55 mm, 102 g |
| Classification | Security grade 2/Environmental class II |
| - according to | EN 50131-1, EN 50131-2-2 |
| - operational temperature range | -10 °C to +40 °C |
| - operational environment | indoor general |
| - certification body | Trezor Test s.r.o. (no. 3025) |
| Also complies with | EN 50130-4, EN 55032 |
