A particular PG output is addressed on the PCB board by using 5 DIP switches. This module does not occupy any postion in the JA-100 system.
The JA-150N is a wireless PG power output module (10 A/230 V AC). It copies the state of a selected PG output in the JA-100 system (PG1 to PG 32).
A particular PG output is addressed on the PCB board by using 5 DIP switches. This module does not occupy any postion in the JA-100 system.
| Power supply; power consumption | 230 V/50 Hz; 1.5W |
| Communication band | 868.1 MHz |
| Relay contact loadability – safety class II | |
| - Maximum acceptable relay voltage | 250 V AC |
| - Resistive load (cosφ=1) | max. 16 A |
| - Inductive (capacitive) load (cosφ=0.4) | max. 8 A |
| - Halogen lighting | max. 1000 W |
| - Minimum acceptable relay throughput DC | 0.5 W |
| Wire diameter | max. 2 x 1.5 mm2 ; max. 1 x 2.5 mm2 |
| Dimensions | 82 x 50 x 19 mm |
| Operational environment to EN 50131-1 | Indoor general |
| Operating temperature range | -10 °C to + 40 °C |
| Also complies with | ETSI EN 300220, EN 50130-4, EN 55022, EN 60950-1 |