The product is a wireless system device for the JABLOTRON 100+. It is designed to detect human body motion inside buildings. Compared to standard motion detectors from the JABLOTRON 100+ series, this detector is designed for ceiling installation.
It is installed on the ceiling and its guaranteed detection coverage is 360° with a capture radius of up to 5.5 m at a mounting height of 3.5 m.
The resistance to false alarms is adjustable at two levels
The detector has a pulse response and occupies one position in the system.
The mounting spacer (PLV-P-ST) is a certified accessory for ceiling detectors; these can be used with wireless detectors to separate the antenna from the mounting surface and thus to potentially improve the range.
| Power | 2x lithium batteries, type CR123A (3 V/1500 mAh) Warning: batteries are not included. |
| Number of batteries | |
| 1x CR123A | |
| Lifetime (Smartwatch mode) | |
| 2 years | |
| Number of batteries | |
| 2x CR123A | |
| Lifetime (Smartwatch mode) | |
| 4 years | |
| Low battery voltage | < 2.4 V |
| Communication band | 868.1 MHz, JABLOTRON protocol |
| RF range | up to 300 m (open area) |
| Recommended installation height | 2.5 – 3.5 m above the ground level |
| Detection coverage | 360°/11 m (installation height – 3.5 m) |
| Dimmensions | Ø 125 x 40 mm |
| Weight (without batteries) | 124 g |
| Classification | security grade 2/II. Indoor general (according to EN 50131-1) |
| Operational environment | indoor general |
| Operational temperature range | -10 °C to +40 °C |
| Average operational humidity | 75 % RH, non-condensing |
| Certification body | Trezor Test s.r.o. (no. 3025) |
| Complies with | EN 50131-1 ed. 2+A1+A2, EN 50131-2-2, EN 50131-5-3+A1, ETSI EN 300 220-1,-2, EN 50130-4 ed. 2+A1, EN 55032, EN 62368-1, EN 50581 |
| Can be operated according to | ERC REC 70-03 |
