JA-180W Wireless PIR and MW combined detector

JA-180W Wireless PIR and MW combined detector

The detector is used for human motion detection in the interior of a building.Thanks to the combination of motion and microwave detection, the detector is highly resistant to false alarms.

When motion is sensed by the PIR detector, the MW detector is activated to confirm the triggering of the PIR. Only after receiving a confirmed alarm signal from the MW unit , the detector sends an alarm report to the control panel.

The detection characteristic may be optimised by using alternative lenses JS-7904 LONG HALLWAY, JS 7906 PET or JS-7901 CURTAIN.

It is addressable and occupies one position in the alarm.

Power supply Lithium battery type CR14500 (AA) 3.6 V/2.45 Ah Please note: Battery is not included
Nominal current 21 μA
Maximal current 38 μA
Battery low voltage ≤ 2.6 V
Typical battery lifetime approx. 2 years (DIP no. 3 to NORM)
Communication band 868.1 MHz, Jablotron protocol
Communication range approx. 300 m (open area)
Recommended installation height 2.0 to 2.5 m above floor level
PIR detection angle/detection range 110°/12 m (with basic lens)
MW detection angle/detection range 24°/15 m (open area)
MW detection angle/detection range 90°/15 m (sample room)
MW detection range/frequency 9.35 GHz
Dimensions 110 x 60 x 51 mm
Weight 114 g
Classification Security grade 2/Environmental class II
Security grade 2/Environmental class II EN 50131-1, EN 50131-2-4, EN 50131-5-3
- operational environment Iindoor general
- operational temperature range -10 °C to +40 °C
- average humidity 75 % RH non condensing
- certification body Trezor Test s,r.o. (no. 3025)
Complies with ETSI EN 300 220, ETSI EN 300 440, EN 50130-4, EN 55022, EN 60950-1
Can be operated according to ERC REC 70-03

BAT-3V6-AA-LS Lithium battery

BAT-3V6-AA-LS Lithium battery  More info can be found