The wireless thermometer can be used in an outdoor environment or an environment with demanding climatic conditions.
In the MyJABLOTRON application, a temperature chart can be plotted, temperature notifications or the switching of PGs on achievement of a certain temperature can be set.
The thermometer is designed for control panels of the JABLOTRON 100+ system. It measures the internal temperature, or an external temperature sensor (JB-TS-PT1000) can be connected that has a measuring temperature range of -50 °C to +200 °C.
The product is supplied with power by two batteries with a total service life of up to 10 years.
| Power | 2x Lithium battery type CR123A (3.0 V/1500 mAh) Please note: Batteries are not included |
| Current consumption (nominal/maximal) | 15 µA/50 mA |
| Typical battery lifetime (applies if the electronics are placed in a non-condensing environment with temperature of 0 °C to +30 °C and relative humidity of 10% - 90% rH). | |
| Sensor type/number of batteries | 1x CR123A |
| Internal | 5 years |
| External (JB-TS-PT1000) | 2 years |
| Sensor type/number of batteries | 2x CR123A |
| Internal | 10 years |
| External (JB-TS-PT1000) | 4 years |
| Low battery reporting | < 2.4 V |
| Communication band | 868.1 MHz, JABLOTRON protocol |
| RF range | up to 200 m (open area) |
| Dimensions | 90 x 110 x 35 mm |
| Weight | 145 g |
| Internal sensor temperature measurement range | -25 °C to +60 °C |
| External sensor temperature measurement range | -50 °C to +200 °C |
| Operational temperature | -25 °C to +60 °C |
| Internal sensor temperature measurement range accuracy | ±0.6 °C |
| External sensor temperature measurement range accuracy | ±1 °C |
| IP coverage | IP53 |
| Also complies with | ETSI EN 300 220, EN 60950-1, EN 50130-4, EN 55022 |
