The wireless multifunctional power relay is a component of the JABLOTRON 100+ system. Enrolled to the control panel, the relay copies selected PG outputs.
The relay can also be installed as an autonomous device responding to the activation of unidirectional wireless detectors of the JA-15x series. In this case, the relay triggers according to the mode selected for the particular detector (5 selectable modes: extended copy, impulse, change status, switch off and block). It provides a switching relay with galvanic safety separation for switching 230V/16A power loads. In the system it occupies one position.
| Operational power | 100 - 230 V/50 - 60 Hz |
| Own power consumption for 230 V AC (min/max) | 0.2 W/0.7 W |
| Communication band | 868.1 MHz, Jablotron protocol |
| Antenna | Internal |
| MFR Contact rating - protection class II: | |
| - Maximum switching voltage | 250 V AC |
| - Resistive load (cosφ=1) | max.16 A |
| - Inductive, capacitive load (cosφ=0,4) | max. 8 A |
| - Halogen lights | max. 1000 W |
| - Minimum switching DC power | 0.5 W |
| Recommended connection wires | max. 2 x 1.5 mm2 ; max. 1 x 2.5 mm2 |
| IP covering | IP-20 (according to EN 60529), IP-40 (with a front panel) |
| Dimensions | 49 x 49 x 26 mm |
| Weight | 65 g |
| Operational temperature range | -10 to + 40°C, relative humidity 75% no condensation |
| Complies with | ETSI EN 300 220-1, EN 50130-4, EN 55022, EN 60950-1 |
| Can be operated to | (ERC REC 70-03) |
