Contact Us

PT-P700-X Label printer

The drivers have to be installed for the proper functioning of the printer. The printer can also be used for printing labels using P-Touch Editor Lite software saved inside the printer memory. In this case no drivers are required.

GD-04K Versatile GSM communicator and controller

GD-04K Versatile GSM communicator and controller It features 2 power outputs (250V/5A) for control. The outputs can be set as status or impulse outputs (impulse length 1s to 10h). When an output is controlled by ringing, a limitation on the number of control events can be assigned to each phone number (suitable e.g. for various paid […]

GD-02K-DIN Universal GSM Communicator and controller

Using the GD-02K-DIN Control 2 outputs – power and signal – activates / deactivates the output with an option to set an impulse (1 s – 24 h). Via SMS or by dialling from 100 phone numbers Monitoring using an input it follows the status of anotherdevice (mains dropout, fault, etc.). Temperature measuring with the […]

JA-120N Bus module for control of an electric lock

The JA-120N can be conveniently installed in all places where an external power supply for electric lock control would be difficult to install. To module responds to a PG output of the control panel or it can be activated with a button connected to the IN input (it can be optionally locked by section control). The module […]

JB-118N Bus signal PG output module – 8 outputs

It is designed for mounting in JA-19xPL multi-purpose boxes or on a DIN rail. The outputs are isolated from the bus. It is set using the DIP switch. It is not addressable (does not occupy a position in the security system).

JB-111N Bus signal PG output module

The module communicates and is powered via the control panel bus. It can be installed in JA-19xPL installation boxes or the control panel box. It is not addressable (does not occupy any position in the security system).

JB-110N Bus PG power output module

The module communicates via a bus and is powered by the control panel bus. It can be installed in a JA-19xPL installation box or a control panel box. It is not addressable (it does not occupy any position in the security system).

JA-150EM-DIN Wireless module for the impulse output of an electric meter

The module contains a radio transmitter designed for the wireless transfer of information from the electric meter via the control panel to the MyJablotron portal. The impulse converter is directly supplied from the mains and it contains galvanically separated circuits for 4 kV. The converter is designed for connection to a standard impulse output of an SO […]

JB-150N-HEAD Wireless thermostatic head

The actuator follows the status of the selected programmable output of the control panel. In a building, up to 48 actuators can be installed independently of the settings of individual thermostats. Before installation, a correct adapter type must be selected with respect to the radiator valve. As supplied from the manufacturer, the actuator comprises the […]

JA-111H-AD TRB Bus module for system control

This built-in module can be directly integrated into the control device. One input of the module has a fixed Tamper signal, several set signals can be selected for the second input and the third input serves either to report a fault of the connected device, or it can be used as the second control conductor with a fixed […]

JA-111H TRB Bus module interface for wire detector

This built-in module can be directly integrated into the detector. One input of the module has a fixed Tamper signal, the second input reports an alarm signal and the third input is used to report a fault of a connected device or to report a special “Masking” signal (for detectors with an Anti-masking function). The module can also be […]

JA-114HN Bus four-input and four-output module

Besides the EOL resistor type, the values of resistors can also be set for the inputs. The outputs are designed as galvanically separated ones (two have a common C terminal in each case). The module occupies four positions in the control panel and it is equipped with a front and rear tamper sensor. It is mainly suitable […]

AC-160-C Mounting-box-fitted wireless multifunctional power relay

The relay can also be installed as an autonomous device responding to the activation of unidirectional wireless detectors of the JA-15x series. In this case, the relay triggers according to the mode selected for the particular detector (5 selectable modes: extended copy, impulse, change status, switch off and block). It provides a switching relay with galvanic […]

AC-160-DIN Wireless multifunctional relay for DIN-rail installation

It provides a switching contact relay with galvanic and safety isolation for switching 230 V/16 A power loads. The relay can respond to the status of control panel PG outputs or to the activation of devices of the JA-15x series with unidirectional communication, enrolled directly to the relay. The response can be selected from five modes – […]

JA-163A Wireless outdoor battery powered siren

The siren consists of a JA-163A-BASE-RB base with the electronic components, a BAT-100A lithium battery and a top enclosure of the JA-1X1A-C-xx series. The enclosures are supplied in several colour designs. It occupies one position in the system. The components of the JA-163A RB product (base, top enclosure and battery) are supplied separately. The reason is free selection […]

JA-111A Bus external siren

Also has a power saving function when the power fails and also a built-in spirit level for accurate and easy placement during installation. Addressable and occupies an alarm system in one position. JA-111A-BASE-RB – bottom part with electronics JA-1X1A-C-ST – stainless steel cover JA-1X1A-C-ST-B – stainless steel cover JA-1X1A-C-WH – plastic cover – white JA-1X1A-C-WH-B – plastic cover – […]

JA-115A Bus external siren

Also has a power saving function when the power fails and also a built-in spirit level for accurate and easy placement during installation. Addressable and occupies an alarm system in one position.

JA-110A II Bus internal siren with battery back-up

The siren button is equipped with programmable reactions. It offers an alarm verification feature. The siren communicates with and is powered by the bus Addressable and occupies one position in the alarm system

JA-110A Bus internal siren

The siren button is equipped with programmable reactions. It offers an alarm verification feature. The siren communicates with and is powered by the bus Addressable and occupies an alarm system in one position.

JA-152A Wireless internal siren for an AC socket

By pressing the siren button an alarm can be silenced or an emergency alarm can be set off. It is equipped with a backup battery in case of a power supply failure. The siren is further equipped with a tamper sensor for detection of unplugging. The siren occupies one position in the system. There are […]

EI208W Stand-alone carbon monoxide detector

The detector is certificated for use in building interiors, caravans and boats. The detector indicates excessive carbon monoxide concentration both optically with a LED (Ei208DW also shows the concentration data on the display) and acoustically using a built-in siren. The detector is powered with an integrated lithium battery which supplies the detector for its whole service life.

EI208DW Stand-alone carbon monoxide detector with display

The detector is certificated for use in building interiors, caravans and boats. The detector indicates excessive carbon monoxide concentration both optically with a LED (Ei208DW also shows the concentration data on the display) and acoustically using a built-in siren. The detector is powered with an integrated lithium battery which supplies the detector for its whole service life.

JA-110F Bus flood detector

When water covers the electrodes the detector sends an activation signal, a deactivation signal is sent if the water leaves the electrodes. It has no tamper facilty and occupies one address in the system.

JA-151ST-A Wireless combined smoke and heat detector with built-in siren

The detector communicates wirelessly and it is supplied by batteries (3x 1.5 V AA). If the detector is operated without being assigned to a control panel or if communication with the control panel has been lost, it works in an autonomous mode (EN 14604). The detector indicates a dangerous situation optically with an integrated light […]

JA-151ST Wireless combined smoke and heat detector with built-in siren

The JA-151ST detector uses wireless communication and it is powered with three AA batteries. The detector should be installed by a trained technician with a valid with a valid manufacturer’s certificate. The detector indicates a fire hazard using the built-in LED indicator and acoustic signalling. The JA-151ST consists of two independent detectors – an optical smoke detector and a heat […]

JA-150ST Wireless fire and temperature detector

It has an alarm memory function where the LED still lights after the alarm state is over. It is battery powered by alkaline batteries. It is addressable and occupies one position in the alarm.

JA-111ST-A Bus combined smoke and heat detector with built-in siren

If the detector’s power is supplied from the control panel bus, it works as a system device (EN 54-7; EN 54-5). If the detector is supplied by inserted batteries (3x 1.5 V AA), in the case of a loss of the 12V supply voltage or communication with the control panel, it continues working as an […]

JA-150TP Wireless indoor thermostat

For switching the heating, standard control panel programmable outputs are used. In a building, up to 16 thermostats can be installed that can control up to 16 independent circuits. The product is a component of the JABLOTRON 100+ system, is addressable and occupies one position in the system. Full integration in MyJABLOTRON = information on the current […]

JA-110TP Bus indoor thermostat

Full integration in MyJABLOTRON = information of the current status and remote control of the thermostat Automatic switch-over to the economy temperature on setting the premises Weekly schedule mode Possibility to enter the manual temperature setting mode Possibility to switch off if only a minimum temperature should be maintained in the building Heating suppression if a window […]

CT-01 Shutter-movement detector

In practice the CT-01 wired outputs are connected to the wired input of a JA-81M door detector to connect the CT-01 signals to the Oasis alarm system. False alarms caused by the wind moving the shutters are avoided by the door detector only raising the alarm when at least 3 pulses are received from the CT-01 in 5 seconds.  

JA-182SH Wireless shock or tilt detector

The detector uses a triple-axis semiconductor accelerometer with a digital output. Digital signal processing guarantees a high detection certainty. The detector is powered by a battery and occupies a single position in the security system.

JA-111SH Bus shock and tilt detector

This may be used for safes, artworks etc. The detector uses a semiconductor tri-axial accelerometer with a digital output. Its signal processing guarantees a high immunity against false alarms.

JA-180B Wireless acoustic glass-break detector

This solution has a high reaction reliability for glass-break detection. The detection sensitivity is very easily adjustable according to distance and the dimensions of the protected windows. The detector has a high immunity against RF jamming and other signals with negative effects. It has been designed for mounting on a flat surface.

JA-110B Bus acoustic glass-break detector

Its sensitivity is adjustable. The detector communicates with and is powered by the bus. The detector is addressable, and occupies one position in an alarm system. SMART MEMORY indication (SMI) provides a visual (LED) verification of detector triggering. SMI is reset via the keypad.

JA-112M Bus module for magnetic detectors – 2 inputs

Up to 100 m of wiring can be connected to each input. Inputs can be connected without balancing, they can be balanced singly or doubly and can be connected to a roller blind switch function. It also allows the inverting of the input or the minimum activation time to trigger the alarm (0.1 s to […]

JA-152M Wireless hidden magnetic detector

The detector is suitable for most industrially manufactured windows. Some types of frames are directly readied for the installation of this detector. It is addressable and occupies one position in the security system.

JA-150M Wireless magnetic detector with 2 universal inputs

Small movements are filtered out so that wind blasts do not cause false alarms. It occupies two separate enrollment addresses in the control panel. The product can be installed by a certified technician with a valid certificate issued by an authorized distributor.

JA-162PW (G) Wireless dual PIR and MW motion detector

The detector features a grey lens that provides increased white light immunity, way above the requirements defined by the norm (up to 10000 lux). This lens helps to reduce false indication of alarms caused, for example, by: car headlight refraction, the setting sun, lightning or reflective surfaces. The immunity to false alarms can be set […]

JA-112P (G) Bus PIR motion detector

The detector meets the highest quality and design requirements, making it suitable even for luxurious interiors. White light resistance helps reduce false alarms caused by illumination through windows, lightning or reflective objects. The detector provides increased white light resistance, this being well above the values prescribed by the standard (up to 10000 lux). The product […]

JA-151IR Wireless 4beam optical barrier

The barrier is a product by Optex supplemented with transmitters compatible with the JABLOTRON 100+. The device is equipped with a 4-ray optical part with a high immunity against false alarms and the detection of small animals. The barrier occupies two positions in the system. The transmitters regularly perform automatic tests and report their status to the system. […]

JA-150IR Wireless optical barrier

The JA-150IR optical barrier is designed for the indication of a breach into a protected area by crossing the IR line between the transmitter and the receiver. The barrier is a product by Optex supplemented with transmitters compatible with the JABLOTRON 100+ system, this being both in the transmitting and receiving part of the barrier. The device is […]

JA-159P Wireless outdoor PIR detector

It supplements a double-zone PIR sensor produced by Optex with a Jablotron transmitter enabling the detector to be used within the JABLOTRON 100+ system. The optical part of the detector has 2 PIR sensors and high immunity to false alarms and the detection of small animals. The detector includes an Anti-masking function – protection against covering the […]

JA-158P Wireless outdoor PIR detector

It supplements a double-zone PIR sensor produced by Optex with a Jablotron transmitter enabling the detector to be used within the JABLOTRON 100+ system. The optical part of the detector has 2 PIR sensors with non-overlapping 94 zone detection, a high immunity to false alarms and the detection of small animals. The detector includes an Antimasking function – […]

JA-157P Dual zone outdoor wireless motion detector – curtain

It is a dual zone outdoor detector by Optex with a 5°angular width detection zone which makes it very suitable for guarding narrow spaces such as balconies, French doors, terraces, etc. It is supplemented with a transmitter compatible with the JABLOTRON 100+ system. The device is equipped with dual-beam optics with a high immunity against false alarms and the […]

JA-186P Wireless dual PIR indoor detector

The battery-powered detector communicates via Jablotron radio protocol. The normal installation height is 120 cm above the floor. The detector has two detection zones each of which covers an angle of 120° and a distance of 12 m. The imaginary dividing line between both zones is determined by the detector installation height. It is addressable and occupies one position […]

Top Vision Security

quick links

Jablotron

Information

Contact Us

© 2024 Top Vision. All Rights Reserved.
Contact Us
Close